I would recommend you go and buy the wall (drywall) stud finder that will make it so easy to find the stud (wood beam location) also get the one from Stanley. That way you can tell were the water pipes and AC electric is. Otherwise you might hurt yourself and have water problems ouch!

Now once you have located the holes, you’ll need a leveler and you can get that at Wal-Mart dirt cheap.

First make a template of the holes location on the rear of the medicine cabinet. Just enough to give you idea where the holes need to go. so it would look like this: [ x x ]

1. use the stud finder and find the stud locations and mark them.
2. drill the hole for the first screw
3. use a flat piece of wood long enough to reach both holes
4. Mark the hole and level the the location use the leveler here also and it should be center.

5. Screw in the screw in the holes leave about 3/4 of inch from the screw and wall. You’ll have to play it by ear here.

Once that is done you can mount the medicine cabinet to the wall. You should be all set.

Take your time, there is no rush..

I would be the pro that gets the calls, have done it many times.